Skip to content

Free · No sign-up · Private

Time to Decimal Calculator

Convert hours, minutes and seconds into decimal hours for payroll, timesheets and invoices. See the working, round it the way your system needs, and calculate pay in one step.

Enter a duration
h
m
Usually 0 to 59
s
Usually 0 to 59

Tip: paste a time like 7:45:30 into any box.

Your answer (decimal hours)7.7507:45:00 = 465 min = 27,900 sec

Show the working

For the entered time07:45:007 hours 45 minutesRounded (2 decimal places): 7.75 h
Quick answerhours + minutes ÷ 60 + seconds ÷ 3600

7:45 = 7.75 hnot 7.45

6 min
0.10
15 min
0.25
30 min
0.50
45 min
0.75

Step by step

How to convert time to decimal hours

There is one formula and it never changes. An hour has 60 minutes and 3600 seconds, so each part becomes a fraction of an hour.

  1. 1

    Keep the hours

    Write down the whole hours as they are. 7 hours 45 minutes starts as 7.

  2. 2

    Divide the minutes by 60

    45 minutes ÷ 60 = 0.75. This is the fraction of an hour.

  3. 3

    Divide any seconds by 3600

    If you have seconds, divide them by 3600 (the seconds in one hour).

  4. 4

    Add the parts together

    7 + 0.75 = 7.75 decimal hours. Round to the precision your payroll or invoice needs.

decimal hours = hours + (minutes ÷ 60) + (seconds ÷ 3600) 2:30 → 2 + 30 ÷ 60 = 2.50 7:45 → 7 + 45 ÷ 60 = 7.75 0:20 → 0 + 20 ÷ 60 = 0.3333 1:30:36 → 1 + 30 ÷ 60 + 36 ÷ 3600 = 1.51

Common mistakes to avoid

  • Writing 1:30 as 1.30. One and a half hours is 1.50. Entering 1.30 underpays 12 minutes.
  • Dividing the whole time by 60. Only the minutes are divided; the hours stay as they are.
  • Rounding every line. Keep 3–4 decimals per entry and round only the total.
  • Forgetting seconds. Divide seconds by 3600, not by 60, before adding them.

Hours & minutes chart

Common shift lengths in decimal hours

Typical timesheet entries converted, with pay at $20 per hour for comparison.

Hours and minutes (H:MM) to decimal hours
Time (H:MM)Decimal hoursCommon mistakePay at $20/hr
4:304.504.30$90.00
6:156.256.15$125.00
7:207.337.20$146.67
7:307.507.30$150.00
7:457.757.45$155.00
8:008.00—$160.00
8:158.258.15$165.00
8:308.508.30$170.00
8:408.678.40$173.33
8:458.758.45$175.00
9:309.509.30$190.00
10:1510.2510.15$205.00
11:5011.8311.50$236.67
12:0012.00—$240.00

Payroll & billing examples

Time to decimal for payroll and invoices

Payroll and time-tracking software such as ADP, QuickBooks, Gusto, Paychex, Rippling, Harvest, Toggl, Clockify and FreshBooks work with hours in decimal format. Convert before you enter hours, and check exports for values like 7.45 that should be 7.75.

Weekly payroll at $22/hour

Weekly pay = total decimal hours × hourly rate

Weekly payroll example in decimal hours
DayTime workedDecimal hours
Monday8h 15m8.25
Tuesday7h 45m7.75
Wednesday8h 30m8.50
Thursday8h 00m8.00
Friday7h 30m7.50
Total40.00 h × $22$880.00

Typing 7.45 for Tuesday instead of 7.75 pays for 7 h 27 m, which is 18 minutes short on that shift.

Freelancer and consultant billing

Invoice amount = decimal hours × hourly rate

Billable time converted to decimal hours and invoice amounts
TimeDecimalAt $75/hrAt $100/hr
1h 15m1.25$93.75$125.00
1h 30m1.5$112.50$150.00
2h 20m2.3333$175.00$233.33
3h 45m3.75$281.25$375.00
6h 40m6.6667$500.00$666.67

Billing 2h 20m as 2.20 instead of 2.3333 hours undercharges $13.33 at $100/hr. Small errors like this add up over a year of invoices.

Excel, Sheets & payroll rules

Converting in spreadsheets, and how to round

Excel and Google Sheets formulas

Spreadsheets store times as fractions of a day, so multiplying by 24 gives decimal hours. Format the result cell as Number, not Time.

=A1*24
→ 7:45 in A1 becomes 7.75
=HOUR(A1)+MINUTE(A1)/60+SECOND(A1)/3600
=A1+B1/60 → hours in A1, minutes in B1
=ROUND((C1-B1)*24, 2) → shift length from start/end

Rounding rules for payroll and billing

Quarter hour (0.25): common in US payroll. Under the FLSA rounding rule (29 CFR 785.48), 1–7 minutes are typically rounded down and 8–14 minutes up, as long as rounding is neutral over time.

Tenth of an hour (0.1 = 6 minutes): the standard billing unit for lawyers, accountants and consultants.

2 decimal places: the default for most payroll software and invoices.

Pick a rule, apply it consistently and check local labour law. This is general information, not legal advice.

Who uses decimal time

Built for anyone who gets paid, or pays, by the hour

  • Payroll & HR

    Payroll software expects hours like 38.75, not 38:45. Converting before entry prevents under- and over-payments.

  • Freelancers

    Bill 2 h 20 m at $90/hr correctly: 2.333 × $90 = $210, not 2.20 × $90 = $198.

  • Law & accounting

    Professional services usually bill in tenths of an hour (6-minute units). Decimal time makes that exact.

  • Construction & trades

    Job costing adds labour hours across crews and sites. Decimal hours sum cleanly in any spreadsheet.

  • Healthcare

    Shift differentials, on-call and overtime are calculated on decimal hours for accurate and compliant pay.

  • Project managers

    Tools like Jira, Toggl and Harvest report in decimal hours for burn rates, budgets and capacity planning.

FAQ

Time to decimal: frequently asked questions

How do I convert time to decimal hours?

Divide the minutes by 60 and the seconds by 3600, then add both to the whole hours. Decimal hours = hours + minutes ÷ 60 + seconds ÷ 3600. For example, 7 hours 45 minutes = 7 + 45 ÷ 60 = 7.75 hours.

Is 7:45 the same as 7.45 hours?

No. 7:45 means 7 hours and 45 minutes, which is 7.75 decimal hours. 7.45 decimal hours is only 7 hours and 27 minutes. Mixing the two is the most common timesheet error.

What is 15, 30 and 45 minutes in decimal?

15 minutes = 0.25 hours, 30 minutes = 0.5 hours and 45 minutes = 0.75 hours. These quarter-hour values are the most used in payroll.

How do I convert decimal hours back to hours and minutes?

Keep the whole number as hours and multiply the decimal part by 60 to get minutes. For example, 8.25 hours = 8 hours + 0.25 × 60 = 8 hours 15 minutes.

How many decimal places should I use for payroll?

Most payroll systems use 2 decimal places (for example 7.75). If you add up many short entries, use 3 or 4 decimal places and round only the final total to avoid accumulated rounding errors.

How do I convert time to decimal in Excel or Google Sheets?

If cell A1 holds a time such as 7:45, use =A1*24 and format the result as a number to get 7.75. If hours and minutes are in separate cells, use =A1+B1/60.

Can I convert time with seconds to decimal hours?

Yes. Divide the seconds by 3600 and add them to the result. For example, 1:30:36 = 1 + 30 ÷ 60 + 36 ÷ 3600 = 1.51 hours.

Is this time to decimal calculator free and private?

Yes. The calculator is free, needs no sign-up and runs entirely in your browser, so the times you enter are never sent to a server.

The bigger picture

Why clocks aren't decimal (but payroll is)

Fully decimal time, with a day of 10 hours of 100 minutes, has been tried. Revolutionary France introduced it in 1793 and suspended it in 1795 because people would not give up their clocks and habits.

So the world settled on a compromise: people read time in hours and minutes, while systems calculate in decimal hours. Converting between the two is a small step, and getting it wrong costs real money.